| |
1O Step Guide
Open, Remove, Inspect, Identify, Connect, Connect, Connect, Wait Ten Minutes, Initiate Positive Vibe Motivator, Make your Call
|
|
Carefully Open your box that contains the VoIP adaptor |
|
Remove from box Look at installation material |
|
Remove the power supply or wall plug |
|
Look at the Sipura box and identify the box's different ports. (they look like two telephone jacks and one extra wide telephone jack or a Ethernet port) |
|
Figure 1 Sipura 2000 the phone ports are on one side and the Ethernet port is on the other.
 |
|
Now with that in mind take the Ethernet wire that was supplied with the Sipura box and connect it to a open port in your home router. They usually look similar to Figure 2 |
|
Figure 2 (typical home router)One of the ports is named WAN that is the WAN port, The wan port connects to your Cable/DSL Modem. There are also ports that are numbered 1,2,3,4 These are the ports that connect to "network devices", network devices such as our Sipura Adaptor.

|
|
Ok, now with the Ethernet cable we supplied you connect it to the Ethernet port (labeled "WAN" on the Sipura Box Figure 1) to a port on the Router (Figure 2) labeled 1,2,3 or 4. You can use any one that is open. |
|
Now Connect the telephone wire we supplied you with to the phone1 or line1 telephone port of the Sipura box and connect that to a telephone or fax machine |
|
Connect the power supply to the Sipura Box |
|
Wait about 10 Mins |
|
Tap your heels together 3 times |
|
Make a phone call |
| |
Yes, I know that it was more then ten steps, but 10 looks so much better then 13. |
| |
Connecting all home phones to the Sipura Box
The Setup is the same process until you reach step number 9. Instead of connecting the Phone 1 line to a telephone Connect it to an available phone jack in your home. Then disconnect your phone line on the side of your home and your good to go.
If you need help or have trouble understanding the Directions give us a call (631)240 9683 we will be happy to assist you or go to our Live Chat Room or Instant Message Us on AIM user name "LiVoIP"
|